Our Current Equipment:
We currently use an ASV RC-100. The RC-100 travels on an advanced RTSS III undercarriage with 18-inch wide rubber tracks and forty-two wheeled contact points that spread the machine weight across the full width of the tracks. With 2,610 square inches of track on the ground, the RC-100 is a highly stable and productive machine platform for mulching, brushcutting and land clearing. At only 4.8 psi ground pressure, this complete package has excellent flotation in soft, wet ground conditions. Torsion axle suspension of the undercarriage helps maximize track contact with the ground for better traction and a smoother ride over rough terrain, cut vegetation and stubble.
Future Equipment:
The Gyro Trac GT-13 machine in operation. The Gyro-Trac GT-13 Its captive track system allows for more aggressive use on inclines, and its powerful 125-horsepower turbo diesel engine can tackle more trees in less time. Coupled with Gyro-Trac's new planar-head technology, the GT-13 outperforms any other machine in its class by more than 2 to 1.
The Gyro Trac GT25 is a low ground pressure, 230hp unit operating a mulching head with an eight foot cutting width. The GT25 is used for clearing heavy brush to small and medium diameter trees. Grinding all material at or just below ground level.
Brush Bandit 250 Chipper.
The Kubota KX080-3 is used for excavating and hard to reach brush clearing.
Tiger Cat 822 Track / Boom Machine in operation. The Tiger Cat 822 is a low ground pressure, 300hp unit, with a 25 foot reach and a zero tail swing. The machine is designed specifically for the timber industry working very effectively on steep slopes. The Fecon mulching head operates with a 56 inch cutting width. The 822 is used for clearing material from heavy brush to large diameter trees. Grinding from the top of the tree down, stumps are left at or just below ground level.
Tiger Cat M760 machines in our land clearing operation. The Tiger Cat M760 is a low ground pressure, 425hp unit, equipped with flotation tires, designed specifically for the timber industry. The Fecon mulching head operates with a nine foot cutting width. The M760 is used for clearing material from heavy brush to large diameter trees. Mulching material and grinding all stumps at or just below ground level.